 |
| Carrier Ethernet demarcation/termination
| Managed Gigabit Ethernet media converter
| Intelligent Ethernet management such as tamper-proof bandwidth limitation, VLAN tagging and double tagging (QinQ)
| Permanent remote in-band management
| Performance monitoring on all ports
| Compact 3U rack mount card |
| |
| Application Example 1 |
| Service providers can adopt ETC-B11 and ETC-B20 to provide Gigabit service to its customers. ETC-B20 and ETC-B11 typically connect to a carrier switch such as Cisco Catalyst, within a distance up to 80 km. At customer end, ETC-B11 and ETC-B20 provide copper or fiber connection to the customer’s IP equipment. The management capability, the compact size, the interroperability between ETC-B and major carrier switch, and the low cost are a few reasons that ETC-B is the right solution for GE termination. |
| |
 |
| |
| Order Matrix |
|
| Carrier Gigabit Ethernet Demarcation |
| Description |
code |
Model |
1 Fiber user link 1000M Fx, 1fiber uplink 1000M Fx |
5008-002 |
ETC-B20/PS-3R |
| 1 RJ45 Ports for10/100BaseT, 1 Fiber uplink 100M Fx |
5008-004 |
ETC-B11/PS-3R |
|
|
| Product Specifications |
Copper User Ports (RJ45) |
ETC-B11 only |
Ports Density |
1 |
Interface |
10/100BaseTx (full/half duplex) |
Auto-Sensing |
Yes |
Auto-Crossing(MDI/MDIX) |
Yes |
Fiber Optic User ports(SFP) |
ETC-B20 only |
Ports Density |
1 |
|
Choose SFP Separately |
Single Fiber Solution |
Support Bi-Directional SFP |
Fiber Optic Line ports(SFP) |
|
Ports Density |
1 |
Wacelength or Distance |
Choose SFP Separately |
Single Fiber Solution |
Support Bi-Directional SFP |
Ethernet Features |
|
Bandwidth Limitation |
Yes |
perfromance Monitoring |
Yes |
DHCP Client Supportt |
Yes |
VLAN Support |
16 port based VLANs with tagging |
| |
acc.IEEE 802.1Q and double tagging(QinQ) |
Supported MAC Address |
4096 |
Maximum Packet Size |
1522 Bytes |
LPT/RFD Support |
Yes |
CoS |
4 priority queues, priority marking acc. 802.1p |
Network Management |
|
Ethernet Port |
Telnet/SSH |
Local Craft |
RS232(VT100) via Stand-alone RA-T-V only |
User Interface |
SNMPv.2, CLI, GUI |
Secure Configuration |
SSHv2 (secure shell) terminal |
Mechanical |
|
Rackmount Card |
3U (fits RA-T-V/33 and CATS RC-U) |
Power Consumption |
<8W |
|
|
|
| |
| Application Example 2 |
| ETC-B11 can work as a managed media converter for Gigabit Ethernet. ETC-B20 is also a 2R repeater to extend the transmission distance. |
 |
|
