 |
| |
| Protocol transparent data transmission for E1/T1
| Permanent leased line Services - no hickups for timing
| Implementation via FPGA - ready to customize
| PDH Ports: up to 8 x E1 or Unframed T1
| Ethernet LAN Ports: 1 or 2 x 10/100BaseT
| Uplink: Copper, Single or Dual Fiber Gigabit bandwidth
| Standard 6U plug-in card, optional 3U small card |
| |
| Order Matrix |
|
Access Multiplexer for voice and data transmission via Ethernet,
MPLS modules deparately. |
| Description |
code |
Model |
| COP 6U card 8xE1/T1,2x10/100BaseTx |
4637-001 |
COP-GE-028/00-6R |
| COP 6U card 8xE1/T1,2x10/100Basetx, 2 fiber 1000M Fx, ordr SFPseparately. |
4637-002 |
COP-GE-028/00-6R |
|
 |
| |
| Application Example - Fiber Multiplexer |
| COP can be used as a fiber multiplxer for dark fiber applications. Transmission protocol is not to be concerned as it’s mostly point-to-point. |
|
| Product Specifications |
LAN Ethernet Port (RJ45) |
|
Number of Ports |
1 |
Bit rate |
10/100BaseTx,auto negotiation, auto crossover |
Compliance |
IEEE 802.1p,IEEE802.1q,IEEE 802.3,IEEE 02.3u |
MAC Adress table |
4K MAC address |
E1/T1 Interface Port (RJ45) |
|
Number of Ports |
8 |
Bit rate |
2.048/1.544 Mbps +/-50/32 ppm |
Line coding |
HDB3 (E1), B8ZS, AMI (T1 ) |
Impedance |
120 Ohm (E1), 100 Ohm (T1) |
Fiber Optic Ports (LC) |
|
Number of Ports |
1 or 2 1000M Fx SFP |
Wavelength or Distance |
Choose SFP |
Management |
|
Ethernet |
10/100BaseT (RJ45) |
Local Craft |
Rs232(RJ45) Available only with stand-alone packaging
|
User Inerface |
|
IP Capability |
|
Qua;ity of service(QoS) |
According IEEE 802.1p VLAN (priority field) , priority labeling (ToS), MPLS label |
VLAN |
Single or double Tagging ,up to 4096 vlans |
E1/T1 Timing Capability |
|
External clock Input |
2048 KHZ (50 ppm) |
Clock Recovery |
Internal(32 ppm) or From Incoming Trafic |
JitterPerformance |
G.823, G.824,G.812 (type VI) |
|
EN302084 ,T1.101(Stratum 4) |
|
Compliant to G.703,G.704 |
Mechanical Dimension |
|
Rack Mount Card |
6U |
| |
fits RA-T-V/66 and CATS 6U rack RC-HD |
Power Consumption |
<15W Max |
|
|
|
| |
| Application Example |
| With doubled E1/T1 density, COP-GE can co-work with COP-FE and/or COP-RS. Below shows an example of offering Ethernet and E1 services to a number of headquarters and remote branch offices. |
|
