 |
| CATS Platform COP Series -
Circuit Emulation over Packet |
|
|
|
 |
| COP-FE044 | E1/T1 and Fast Ethernet over Copper |
| |
| TDM and IP Copper Multiplexer |
 |
| |
| Cost-effective extension of four traditional E1/T1 data interfaces plus two Ethernet interfaces over Packed Switched Networks (PSN)
| Optimized use of packet based infrastructure
| Supports Ethernet, IP, MPLS, VLAN and double VLAN tagging
| Efficient use of existing bandwidth for legacy data via less expensive PSN
| Enables Point-to-Point and Point-to-Multipoint applications
| Supports QoS on different layers depending on the PSN type
| Superior Jitter and Timing Performance |
| |
 |
| |
| Order Matrix (COP-FE Copper Type) |
| |
|
|
| Product Specifications |
| Protocol transparent data transmission for E1/T1
| Data rates: 4 x E1/T1 (2.048/1.544 Mbps) plus 2 x 10/100BaseTx
| Supports fractional (n x 64 kbps) and grooming services
| External reference clock port
| Increase the number of interfaces by cascading COP-FEs
| Redundant copper or fiber optic interface on the line site, supporting several wavelengths
| Management features like SNMP, Telnet & web-based GUI |
LAN Ethernet Port (RJ45) |
|
Number of Ports |
2 or 3 (software configurable ) |
Bit rate |
10/100BaseTx,auto negotiation, auto crossover |
Compliance |
IEEE 802.1p,IEEE802.1q,IEEE 802.3,IEEE 02.3u |
MAC Adress table |
1K MAC address |
E1/T1 Interface Port (RJ45) |
|
Number of Ports |
4 |
Bit rate |
2.048/1.544 Mbps +/-50/32 ppm |
Compliance |
HDB3 (E1), B8ZS, AMI (T1 ) |
Impedance |
120 Ohm (E1), 100 Ohm (T1) |
WAN, Ethernet Port (RJ45) |
|
Number of Ports |
1 or 2 (software configurable) |
Bit rate |
10/100BaseTx,auto negotiation, auto crossover |
Compliance |
IEEE 802.1p,IEEE802.1q,IEEE 802.3,IEEE 02.3u |
MAC Adress table |
1K MAC address |
Management |
|
Ethernet |
10/100BaseT (RJ45) |
Local Craft |
Rs232(RJ45) Available only with stand-alone packaging
|
User Inerface |
|
IP Capability |
|
Qua;ity of service(QoS) |
According IEEE 802.1p VLAN (priority field) ,
priority labeling (ToS), MPLS label |
VLAN |
Single or double Tagging ,up to 4096 vlans |
E1/T1 Timing Capability |
|
External clock Input Clock Recovery JitterPerformance |
2048 KHZ (50 ppm) Internal(32 ppm) or From Incoming Trafic G.823, G.824,G.812 (type VI) EN302084 ,T1.101(Stratum 4) Compliant to G.703,G.704 |
|
Mechanical Dimension |
|
Rack Mount Card |
6U (Fits RA-T-V/66 for stand-alone or CATS 6U rack for POP) |
Power Consumption |
<12W |
|
|
|
| |
 |
|
| |
| COP-FE124/224 | E1/T1 and Fast Ethernet over Fiber |
| |
| TDM and IP Fiber Multiplexer |
| |
 |
| Protocol transparent data transmission for E1/T1
| PDH Ports: 4 x E1 or Unframed T1
| Ethernet LAN Ports: 2 x 10/100BaseT
| Uplink: Single or Dual Fiber
| Uplink Maximum Data Rate: 100Mbps
| Supports QoS on different layers depending on the PSN type |
| |
| Order Matrix |
|
Access Multiplexer for voice and data transmission via ethernet,
MPLS or IP networks |
| Description |
code |
Model |
| COP 6U card 4xE1/T1, 2xFE,1 fiber 100M Fx default 1300nm 15KM |
4635-001 |
COP-FE-124/9L-6R |
| COP 6U card 4xE1/T1, 2xFE,1 fiber 100M Fx 1300nm 40KM |
4635-013 |
COP-FE-124/DL-6R |
| COP 6U card 4xE1/T1, 2xFE,1 fiber 100M Fx 15500nm 80KM |
4635-015 |
COP-FE-124/CL-6R |
| COP 6U card 4xE1/T1, 2xFE,1 fiber 100M Fx default 1300nm 15KM |
4635-101 |
COP-FE-224/9L-6R |
| COP 6U card 4xE1/T1, 2xFE,1 fiber 100M Fx 1300nm 40KM |
4635-113 |
COP-FE-224/DL-6R |
| COP 6U card 4xE1/T1, 2xFE,1 fiber 100M Fx 15500nm 80KM |
4635-115 |
COP-FE-224/CL-6R |
|
| |
|
| |
| Product Specifications |
LAN Ethernet Port (RJ45) |
|
Number of Ports |
2 |
Bit rate |
10/100BaseTx,auto negotiation, auto crossover |
Compliance |
IEEE 802.1p,IEEE802.1q,IEEE 802.3,IEEE 02.3u |
MAC Adress table |
1K MAC address |
E1/T1 Interface Port (RJ45) |
|
Number of Ports |
4 |
Bit rate |
2.048/1.544 Mbps +/-50/32 ppm |
Compliance |
HDB3 (E1), B8ZS, AMI (T1 ) |
MAC Adress table |
120 Ohm (E1), 100 Ohm (T1) |
WAN, Ethernet Port (RJ45) |
|
Number of Ports |
1 or 2 (software configurable) |
Bit rate |
10/100BaseTx,auto negotiation, auto crossover |
Compliance |
IEEE 802.1p,IEEE802.1q,IEEE 802.3,IEEE 02.3u |
MAC Adress table |
1K MAC address |
Management |
|
Ethernet |
10/100BaseT (RJ45) |
Local Craft |
Rs232(RJ45) Available only with stand-alone packaging
|
User Inerface |
|
IP Capability |
|
Qua;ity of service(QoS) |
According IEEE 802.1p VLAN (priority field) , priority labeling (ToS), MPLS label |
|
VLAN |
Single or double Tagging ,up to 4096 vlans |
E1/T1 Timing Capability |
|
External clock Input |
2048 KHZ (50 ppm) |
Clock Recovery |
Internal(32 ppm) or From Incoming Trafic |
JitterPerformance |
G.823, G.824,G.812 (type VI) |
|
EN302084 ,T1.101(Stratum 4) |
|
Compliant to G.703,G.704 |
Mechanical Dimension |
|
Rack Mount Card |
6U |
|
(fits RA-T-V/66 for stand-alone or CATS 6U rack for pop) |
Power Consumption |
<12W |
|
|
|
| |
|
| Application Example |
A Service Provider requires to connect E1 for voice and IP for HSDPA using single box solution. We offered COP. The solution can support 4,8 or16 xE1 + IP over 100M fiberoptic link with dual fiber redundancy to close the ring. It features following:
| Optical ADM with ring protection | In-band and out-band network management | Small foot print and simple installation |
 |
| |
|
|
|
