Dowslake Microsystem Your location: Home / Products & Solutions  
 
 
  Home > Products >MTS-Carrier Ethernet Switch
MTS194 | Gigabit Carrier Ethernet L3 Switch
 
 
Main Features

| Up to 4 x GE Port Carrier Ethernet Switch
| 1U 19 inch rack 24 x 10/100BaseT ports
| IPv4 L3 hardware based routing
| IPv4 L3 hardware based multicast routing
| Bandwidth configuration and QoS, Q-in-Q features
| Ring Protection Switching per EAPS
| OAM Features per 802.3ah
| Power redundant dual AC or dual DC
Management Features
- Command Line Interface (CLI), SNMP v1,v2
- SSHv2,Telnet, FTP/TFTP
- Remote In-band Management
- Alarm: traps and dry-contact
- RADIUS & Syslog
- RMON: RFC2819 groups (Ethernet history, Alarm, and    Event)
- Reports for customer validation
L2 Switching Capability

- Auto-negotiation for port speed and duplex mode Flow    Control:
- IEEE 802.3x & Back-Pressure
- Spanning Tree Protocol:
   STP, RSTP, MSTP
- VLANs:
   4K IEEE 802.1Q VLANs
   Port-based VLAN
   Q-in-Q 802.1ad
- Link Aggregation:
   Static Trunk
   IEEE 802.3ad LACP
   Load Balancing: SA, DA, SA + DA, SIP, DIP, SIP+, DIP
   Trunk groups: 8 per group, max. 32 groups
- Multicast
   IGMP Snooping
   IGMP Proxy query


QoS Capability

- 8 Priority Queues
- Two levels of hierarchical scheduling policing    parameters:
   CIR, PIR, CBS, EBS
- Priority Queues Scheduling Scheme:
   SP, WRR, WDRR, SP+WRR/WDRR
- Rate Limiting: 1Mbps per step
- UNI port Egress Policing: Per flow, EVC, UNI port
- Total number of flow: >1K
- Traffic classification and priority management based on:
   IEEE 802.1p
   IP Precedence/DSCP
   TCP/UDP port number
   IP Address
   Mac Address
   Ethernet Type


L3 Routing Capability
- Comprehensive IPv4 unicast routing support
- Static, RIP, OSPF, IS-IS, BGP-4 support
- Support for VRRP
- 8-path Equal Cost Multipath (ECMP)
- Supported IPv4 multicast protocols include PIM-DM,PIM-SM, PIM-   SSM
- IGMP v2/v3 routing and snooping support

Product Specifications
Fast Ethernet  
Port Density
Up to 24
Port Configuration
24 x 10/100BaseT (RJ45)
Gigabit Ethernet
Port Density Up to 4
Data Rate 1000BaseFx & 10/100/1000BaseT Combo
Wavelength or Distance Choose SFP separately (1310, 1550, WDM)
Single fiber solution BiDi SFP optional
Ethernet Features
QoS
8 Queues, 2 scheduling/policing levels
VLAN Support
Port based tagging and QinQ. Policing/Shaping/Scheduling
Supported VLANs
4k 802.1Q
MAC Address
16k
Routing Table
30k
Buffer
64 Mb
Link Aggregation
802.3ad LACP
STP
STP, RSTP, MSTP
Routing
RIP v1/v2, OSPFv2, BEIGRP, BGPv4
Network Management
RMON
RFC2819 group 1,2.3.9
Local Craft
RS232 (VT100)
Remote Management
SNMPv.2, CLI
Secure Configuration
SSHv2 (Secure Shell) terminal
Operating Conditions
Power Supply
100 ~ 240VAC
Dual AC 100~240V
Dual DC -48V
Temperature
0 to + 50 °C
Humidity
5 to 85% non-condensing
Power Consumption
60 W
Mechanical (1RU rack)
44mm × 442mm x 316mm (H x W x D)

Order Matrix
Gigabit Carrier Ethernet L3 Switch
 Description code Model
MTS194 L3 switch 24xRJ45 10/100BaseT, 4xGE combo RJ45 and optical SFP, SFP not included, 1RU 19” shelf with AC/DC power supply and SNMP/CLI management interface
7010-170 MTS194-2400-4
Please Order pluggable SFP modules separately.

 
 
POP,SmartGAIN,CMS1025,Smart Network Building Blocks are trade marks of Dowslake Microsystems Corp.

Copyright © 2010-2024 Dowslake Microsystems. All Rights Reserved.