Dowslake Microsystem Your location: Home / Products & Solutions  
 
 
  Home > Products > MTE Series EPON Service
MTE1006 | 4FE+2POTS ONU MTE Series EPON Service MTE1006V1.2
 
Main Features
| Symmetric uplink/downlink 1Gbps PON transmission rate, effi
cient bandwidth usage and Ethernet services, helping carriers
to provide reliable services to their users.
| Supports SLA and DBA
| Support IGMP multicast and efficiently utilize the bandwidth
| Ethernet looping detection, automatically check the network
looping interrupted, and resume the network when the looping
disappeared
| Remote loopback and remote diagnostic of the network state
| Rich OAM function designs, including the configuration,
alarm, performance monitoring, fault separation and security
management
 
Product Specifications Hardware Specifications

Vlan

802.1Q vlan
QinQ VLAN, 1:1 VLAN, VLAN Trunk
Vlan ID:64 Full Range VLAN ID
CTC vlan

Ethernet Port

Port auto negotiation
MDI/ AUTO MDIX
Per port ingress/egress rate limit
Port isloation
Port mirror

Reliability

Unidirectional Link Detection (UDLD)
Dying-Gasp

Multicast

IPV4 IGMP snooping/IPV6 MLD snooping
CTC controllable snooping

Qos

IEEE802.1p QoS 4 Queue per port

PON

Compatible with CTC V2.1 specification
Compatible with 802.3ah
Compatible with PMC/TK/Cortina OLT

OAM

CLI, WEB, CTC OAM, Firmware Remote & Local upgrade

VoIP

Support SIP/MGCP/H.248
Compatible with HW/ZTE/ASB Softswitch
Support ITU-T G.711, G.723.1, G.729
Support EC (Echo Canceler),MAX 128ms
Support high or low speed pass-through or T.38 FAX
Support RFC2833 and redundant RFC2833, MD5 authentication,
hot-line, call transfer, alarm clock, Abbreviated dialing
Support 3-way meeting
7x24 hours call missing ≤0.01%
Support GR909 line detection

Hardware and Interface

1 GEPON interface
4 Ethernet LAN port(10/100 Base-T )
2 POTS
1 Power Supply port
1 Reset to Factory Default Button

Physical structure

Requirements of dust prevention: dust’s diameter > 5μm; dust concentration ≤3×104 corpuscle/m3

Installation

desktop

Heat cooling

The heat generated by the device in a long-time use (24 hours) cannot lead to the degrading of the performance and the deformation of the components.

Environment requirements

Working condition: -5°C-45°C; 5%-95% no condensation
Storage condition: -20°C-70°C; 5%-95% no conde

Power Supply

Type of the power adapter: the on-off power adapter
Input voltage: 110V~240V, 50Hz ±5%
Output voltage: 12W, 1.5A
Fluctuated range of the input voltage: ±20% (domestic); ±10% (international)
Fuse: Installing the irrecoverable temperature fuse (or temperature
resistance) at the input terminal
Over-current protection and overvoltage protection
Power consumption: Up to 12W

Dielectric strength

Power source to hull: AC 3000V, lasting one minute
Power source to network port: AC 3000V, lasting one minute

EMC

GB9254-1998(idt CISPR22:1997)

Demension

206.0 mm(W) x 135.5 mm(D) x 41.8 mm(H)

 
Order Matrix  

MTE 1006

EPON ONU

Description

Code

Model

Desktop ONU, 1 PON interface (SC), 4 FE ports, 2 VoIP ports, plastic hull, AC220V, outside adapter

7020-190

MTE1006

Please Order pluggable SFP modules separately.

 
 
POP,SmartGAIN,CMS1025,Smart Network Building Blocks are trade marks of Dowslake Microsystems Corp.

Copyright © 2010-2024 Dowslake Microsystems. All Rights Reserved.