 |
MTE1004RFSO | 4FE+CATV Outdoor SFU  |
| |
|
 |
| Main Features |
| Symmetric uplink/downlink 1Gbps PON transmission rate, effi
cient bandwidth usage and Ethernet services, helping carriers
to provide reliable services to their users.
| Supports SLA and DBA
| Support IGMP multicast and efficiently utilize the bandwidth
| Ethernet looping detection, automatically check the network
looping interrupted, and resume the network when the looping
disappeared
| Remote loopback and remote diagnostic of the network state
| Rich OAM function designs, including the configuration,
alarm, performance monitoring, fault separation and security
management
| CATV RF support with adjustable Slope and Gain
| Outdoor working enviroment |
|
| |
| Product Specifications |
Hardware Specifications |
Vlan |
802.1Q vlan
802.1ad QinQ VLAN, 1:1 VLAN, VLAN Trunk
Vlan ID:1-4094 |
Ethernet Port |
Port auto negotiation
MDI/ AUTO MDIX
Per port ingress/egress rate limit
Port isloation
Port mirror
802.1D |
Reliability |
Unidirectional Link Detection (UDLD)
Dying-Gasp |
Multicast |
IPV4 IGMP snooping/IPV6 MLD snooping
Controllable IGMP snooping |
Qos |
802.1p QoS 4 Queue per port |
PON |
Compatible with CTC V2.1 specification
Compatible with 802.3ah
Compatible with PMC/TK/Cortina OLT |
OAM |
CLI, WEB, CTC OAM, Firmware Remote & Local upgrade |
| CATV |
support CATV RF output |
| |
| |
Order Matrix |
MTE 1004RFSO |
|
|
EPON ONU |
Description |
Code |
Model |
Outdoor ONU,1 PON interface (SC),4 FE ports,2
CATV RF ports,IP67 enclosure,AC220V,external Power adapter |
7020-195 |
MTE1004RFSO |
Please Order pluggable SFP modules separately. |
|
Hardware and Interface |
1 GEPON interface SC/APC
4 Ethernet LAN port(10/100 Base-T )
1 Power Supply port
1 Reset to Factory Default Button
2 CATV RF port (1 for test) |
PON SFP Rcv Sencitivity |
-8 ~ -24db |
PON SFP Transmit Power |
-1 ~ 4db |
Wavelength |
EPON Upstream 1310nm, Downstream 1490nm
CATV 1550nm |
Physical structure |
IP67 protection |
Installation |
Outdoor wall mount installation |
Heat cooling |
The heat generated by the device in a long-time use (24 hours) will not lead to the degrading of the performance and the deformation of the components. |
Environment requirements |
Working condition: -30°C-70°C; 5%-95% no condensation
Storage condition: -40°C-85°C; 5%-95% no condensation |
CATV |
Connector: 75Ω
Wavelength: 1550nm
Bandwidth: 47Mhz ~ 870Mhz
Output Level: 90-100dBuV
Output Return Loss: 14db
Gain adjust: 0-10db
Slope adjust: 3-18db |
Power Supply |
Type of the power adapter: the on-off power adapter
Input voltage: 110V~240V, 50Hz ±5%
Output voltage: 12W, 1.5A
Power consumption: Up to 12W |
Dielectric strength |
Power source to hull: AC 3000V, lasting one minute
Power source to network port: AC 3000V, lasting one minute |
Thunder prevention |
Power source: differential mode 2.5KV, common mode 4KV
Network port: common mode 1KV |
EMC |
CE certification |
Demension |
266 mm(W) x 185 mm(D) x 161 mm(H) |
|
|
|
|
|
