 |
MTE1004 | 4FE ONU  |
| |
|
 |
| Main Features |
| Symmetric uplink/downlink 1Gbps PON transmission rate, effi
cient bandwidth usage and Ethernet services, helping carriers
to provide reliable services to their users.
| Supports SLA and DBA
| Support IGMP multicast and efficiently utilize the bandwidth
| Ethernet looping detection, automatically check the network
looping interrupted, and resume the network when the looping
disappeared
| Remote loopback and remote diagnostic of the network state
| Rich OAM function designs, including the configuration,
alarm, performance monitoring, fault separation and security
management |
|
| |
| Product Specifications |
Hardware Specifications |
Vlan |
802.1Q vlan
QinQ VLAN, 1:1 VLAN, VLAN Trunk
Vlan ID:64 Full Range VLAN ID
CTC vlan |
Ethernet Port |
Port auto negotiation
MDI/ AUTO MDIX
Per port ingress/egress rate limit
Port isloation
Port mirror |
Reliability |
Unidirectional Link Detection (UDLD)
Dying-Gasp |
Multicast |
IPV4 IGMP snooping/IPV6 MLD snooping
CTC controllable snooping |
Qos |
IEEE802.1p QoS 4 Queue per port |
PON |
Compatible with CTC V2.1 specification
Compatible with 802.3ah
Compatible with PMC/TK/Cortina OLT |
OAM |
CLI, WEB, CTC OAM, Firmware Remote & Local upgrade |
| |
| |
Order Matrix |
MTE 1004 |
|
|
EPON ONU |
Description |
Code |
Model |
Desktop ONU, 1 PON interface (SC), 4 FE ports, plastic hull, AC220V, external Power adapter |
7020-189 |
MTE1004 |
Please Order pluggable SFP modules separately. |
|
Hardware and Interface |
1 GEPON interface
4 Ethernet LAN port(10/100 Base-T )
1 Power Supply port
1 Reset to Factory Default Button |
Physical structure |
Requirements of dust prevention: dust’s diameter > 5μm; dust concentration ≤3×104 corpuscle/m3 |
Installation |
desktop |
Heat cooling |
The heat generated by the device in a long-time use (24 hours) cannot lead to the degrading of the performance and the deformation of the components. |
Environment requirements |
Working condition: -5°C-45°C; 5%-95% no condensation
Storage condition: -20°C-70°C; 5%-95% no condensation |
Power Supply |
Type of the power adapter: the on-off power adapter
Input voltage: 110V~240V, 50Hz ±5%
Output voltage: 12W, 1.5A
Fluctuated range of the input voltage: ±20% (domestic); ±10% (international)
Fuse: Installing the irrecoverable temperature fuse (or temperature
resistance) at the input terminal
Over-current protection and overvoltage protection
Power consumption: Up to 12W |
Dielectric strength |
Power source to hull: AC 3000V, lasting one minute
Power source to network port: AC 3000V, lasting one minute |
Thunder prevention |
Power source: differential mode 2.5KV, common mode 4KV
Network port: common mode 1KV |
EMC |
GB9254-1998(idt CISPR22:1997) |
Demension |
206.0 mm(W) x 135.5 mm(D) x 41.8 mm(H) |
|
|
|
|
|
